74
Orion Versa Star Pro Meter User Manual
Thermo Scientific
5
Conductivity Measurement Module
Connecting Electrodes to the Module
To begin using the Versa Star Pro meter and module system, prepare the meter and insert the
module into an available channel on the back of the meter. See
Chapter 2 Meter Basics
for
instructions. For information on customizing meter settings, refer to
Chapter 3 Setup Menu
.
It is recommended that electrodes be placed in the meter-attached electrode stand for easy
movement in and out of beakers during calibration, sample measurement and storage.
VSTAR-CND Versa Star Conductivity Module
1.
Connect a conductivity probe to the 8 pin MiniDIN connector on the module. If the
conductivity probe has a built-in temperature probe, the temperature will also be measured
when the conductivity probe is connected.
2.
Prepare the conductivity probe for use as instructed in the probe user manual.
Chapter 5
8 pin MiniDIN
