Thermo Scientific Invitrogen Countess II FL User Manual Download Page 74

Page: 74 / 82

Safety labels on instruments

The following CAUTION, WARNING, and DANGER statements may be displayed

Thermo Fisher Scientific instruments in combination with the safety symbols

described in the preceding section.

Symbol

English

Français

CAUTION! Hazardous chemicals. Read the Safety

Data Sheets (SDSs) before handling.

ATTENTION! Produits chimiques dangereux. Lire

les fiches techniques de sûreté de matériels avant

toute manipulation de produits.

CAUTION! Hazardous waste. Refer to SDS(s) and

local regulations for handling and disposal.

ATTENTION! Déchets dangereux. Lire les fiches

techniques de sûreté de matériels et la régulation

locale associées à la manipulation et l’élimination

des déchets.

DANGER! High voltage.

DANGER! Haute tension.

WARNING! To reduce the chance of electrical

shock, do not remove covers that require tool

access. No user-serviceable parts are inside. Refer

servicing to Thermo Fisher Scientific qualified

service personnel.

AVERTISSEMENT! Pour éviter les risques

d’électrocution, ne pas retirer les capots dont

l’ouverture nécessite l’utilisation d’outils.

L’instrument ne contient aucune pièce réparable

par l’utilisateur. Toute intervention doit être

effectuée par le personnel de service qualifié

venant de Thermo Fisher Scientific.

DANGER! Class 3B visible and/or invisible laser

radiation present when open. Avoid exposure to

beam.

DANGER! Rayonnement visible ou invisible d’un

faisceau laser de Classe 3B en cas d’ouverture.

Evitez toute exposition au faisceau.

CAUTION! Moving parts. Crush/pinch hazard.

ATTENTION! Pièces en mouvement, risque de

pincement et/ou d’écrasement.

General instrument safety

WARNING!

PHYSICAL INJURY HAZARD. Use this product only as specified

in this document. Using this instrument in a manner not specified by Thermo

Fisher Scientific may result in personal injury or damage to the instrument.

Ensure that anyone who operates the instrument has:

• Received instructions in both general safety practices for laboratories and specific

safety practices for the instrument.

• Read and understood all applicable Safety Data Sheets (SDSs).

Operating the

instrument

Appendix E

Safety

Safety labels on instruments

Countess

™

II FL automated cell counter User Guide

Summary of Contents for Invitrogen Countess II FL



















































































Search results

Summary of Contents for Invitrogen Countess II FL

Reviews:

Brands by name

Popular brands

Thermo Scientific Invitrogen Countess II FL, User Manual

Search results

Summary of Contents for Invitrogen Countess II FL

Reviews:

Brands by name

Popular brands