Thermo Scientific ID Scribe, User Manual

Page: 28 / 64

Loading and Removing a Pen
Removing a Pen
3-2 ID Scribe User Manual Thermo Scientific
Figure 3–2. Tighten by rotating clockwise
Your pen assembly is now properly loaded into ID Scribe.
After printing of labware is completed, remove and cap the pen to
prevent the pen from drying out. To remove the pen, simply turn the
turn the thumbscrew screw counterclockwise (same screw used to load
pen) in the penholder until pen is loose. Remove the pen by lifting it out
of the penholder hole in the ID Scribe and cap for future use.
Removing a
Pen