ID Scribe and Software Installation
Installing the Software
Thermo Scientific
ID Scribe User Manual
1-3
The ID Scribe communicates with your computer via USB. These USB
drivers are located on the CD labeled “KeySpan USB Serial Adapter
Software”.
•
Insert the Keyspan or ID Scribe CD into your CD-ROM drive on
your computer.
Figure 1–2.
USB Driver Screen Shot
The screen above should automatically appear, but if it does not, run
the Launch.exe file on the CD or double-click on “Keyspan-
USA19HS-driver-3.7S-WIN2000.xp.vista”. Click “Install
Software” on the top right portion of the window.
When the above screen appears click on “Install Keyspan USB
Serial Adapter software”
Click “Yes” to proceed
Click “Next” to install the driver in the default location
Registration is optional. For fastest installation click “Cancel”
Click “Exit Registration" to proceed”
Click “Finish" to complete USB driver installation
The ID Scribe software is single executable file named ID Scribe.exe
and does not require a formal “installation”. The files can merely be
“dragged-and-dropped” onto your computer. There is no restriction on
Installing USB
Drivers
Installing the ID
Scribe Software
Summary of Contents for ID Scribe
