Thermo Scientific ID Scribe, User Manual

Page: 57 / 64

Troubleshooting and Tips
Adjusting New Labware Files
Thermo Fisher Scientific ID Scribe User Manual 9-3
2. Save spreadsheet to be printed onto desktop as “idscribe.xls” (or
other convenient name).
3. On the ID Scribe Software uncheck “Load Currently Open Excel
File”
4. Click “Load Spreadsheet”
5. In the dialog box that appears, browse to desktop location and select
“idscribe.xls” spreadsheet.
6. Recheck “Load Currently Open Excel File” in the ID
Scribesoftware.
7.
Click “Load Spreadsheet” then click “Print tubes”
Do not plug in USB cable connecting ID Scribe to your computer until
instructed.
This installation typically requires local administrative privileges:
1. Copy the "ID Scribe Software" folder on old computer onto a USB
flash drive.
2. Copy that folder on to any computer you would like to install the ID
Scribe software. A typical location that gives access to all users who
log on to the computer is:
C:\Documents and Settings\All Users\Desktop
3. Install the USB Drivers onto the new computer.
4. Turn on the ID Scribe.
5. Connect USB cable and wait until "new hardware" is installed.
6. Open "ID Scribe.exe" in ID Scribe Software folder.
7. "Found an ID Scribe" should be displayed in bottom left corner.
Software
Migration