Thermo Scientific iCAP RQ ICP-MS, Pre-Installation Requirements Manual

Page: 24 / 71

Site Preparation
Dimensions and Weights
Thermo Scientific iCAP RQ Pre-Installation Requirements Guide (P/N BRE0009927, Revision A) 2-9
❖
To store away the handles
1. At the left hand side of the instrument, push down the spring (
1
in
Figure 2-7 ) of the handle ( 2 in Figure 2-7 ) by using an screw driver
and push the handle into its housing. See
3
in Figure 2-7 .
❖
To mount the drip tray
1. At the right side of the instrument, pull the handles outside.
2. To mount the drip tray (
1
in Figure 2-8 ) onto the handles, place the
two bolts at the bottom of the drip tray into the notches of the
handles. See
2 in Figure 2-8 .
Labeled Components: 1=spring, 2=handle, 3=handles in housing
Figure 2-7. Shoving handle into housing
Labeled Components: 1=drip tray, 2=notch
Figure 2-8. Mounting drip tray
1
2
3
1
2