Thermo Scientific HB-S200 User Manual Download

Page: 64 / 77

Sarasota 200 Ultrasonic Multipath
Flowmeter

Appendix 1 GAFA PC Software Page A1-22

Thermo Fisher Scientific

APPENDIX 1 GAFA PC SOFTWARE

A1.7 Password

Notes

•

The password is actually a 6 digit number.

•

The password is set at the factory to 999999

•

The Sarasota 200 may be viewed without entering a password but no data may be written
to it without the password having been entered.

•

Entering the password via the above screen allows unrestricted access for viewing and
writing.

•

Once unrestricted access has been obtained, the password may be changed via the
“Config Station – System” screen A1.4.1.1.

•

Once unrestricted access has been obtained, the above screen will not be displayed.

•

If the password becomes lost, consult the supplier for an unlocking code.

•

If no password protection is required, the password should be set to 000000.

Summary of Contents for HB-S200














































































Search results

Summary of Contents for HB-S200

Reviews:

Related manuals for HB-S200

Brands by name

Popular brands

Thermo Scientific HB-S200, User Manual

Search results

Summary of Contents for HB-S200

Reviews:

Related manuals for HB-S200

Brands by name

Popular brands