Thermo Scientific HB-S200, User Manual

Page: 44 / 77

Sarasota 200 Ultrasonic Multipath
Flowmeter
Appendix 1 GAFA PC Software Page A1-2 Thermo Fisher Scientific
APPENDIX 1 GAFA PC SOFTWARE
A1.2 Main Screen
Notes
•
This is the main screen showing current measurements and status.
•
Measurements displayed on this screen are subject to averaging as set up on the
“Station Configuration - System” screen A1.4.1.1.
•
Cumulative volume is the total volume passed since last reset via the “Station
Configuration – System” screen A1.4.1.1.
•
If more than 1 level input is used, the Level displayed on this screen is the combination
subject to the arbitration rules given in section 1 of this manual.
•
Average temperature is taken from all sensors with transducers that are in the water.
Transducers above the water are not included. Temperature is measured by sensors in
the transducer smart electronic circuits. For 1 MHz transducers this will often not be
water temperature since the circuits are in Tboxes which may be out of the water.
Individual temperatures may be viewed on the “Velocity Paths” screen A1.3.2.
•
Data presented on the screen is automatically refreshed every 30 seconds.
•
Click on “Refresh” to update immediately.
•
Click on menu bar across the top of the screen to obtain drop down menus for other
screens.
•
Pressing Escape on the PC keyboard when in other screens causes a return to the
previous screen.