Thermo Scientific DensityPRO NAI Series, User Manual

Page: 38 / 196

Startup & the Setup Wizard
The Setup Wizard
3
-
8 DensityPRO User Manual Thermo Scientific
1. Click the indicator to select the appropriate detector and application.
2. Next, select an application for the detector from the dropdown list immediately to
the right.
Selecting a General Density or Oilfield application – in this case, Density – will
preload a number of the gauge parameters with factory defaults typical for the
chosen type of application.
Note: For the purposes of setup in this manual, the Density application will be
used.
3. Click the Next button to move to the Density Application Selection window.
Figure 3-4. Application Type Selection
a. General Density – The most generic of the application selections, this
selection configures the gauge for a typical remove slurry application. When in
doubt, this is a good default application. The configuration is very similar to
the default configuration found in our previous products.
b. Oilfield – An application expressly designed for the DensityPRO NAI-O
gauges used in the hydraulic fracturing, or fracking, industry, this
configuration is very similar to the fracking preload configuration found in
our previous products.