Thermo Scientific DensityPRO NAI Series, User Manual

Page: 29 / 196

Thermo Scientific DensityPRO User Manual 2
-
1
Chapter 2
EZ Cal II Overview
Features
The EZ Cal II PC user interface software provides a way for users to interact with the
DensityPRO gauges.
The DensityPRO integrated units provide the option of having a local display screen,
but do not have a keypad. This prohibits users from controlling and configuring the
gauge. Connecting the integrated unit to a PC running the EZ Cal II software provides
the user with these abilities.
The DensityPRO remote units include a keypad and display screen. All of the
operations available to the user through use of the gauge’s keypad are also available in
the EZ Cal II software. Using the software allows the user to be away from the gauge
and provides a more user-friendly interface for interaction.
The EZ Cal II PC user interface software provides the user with:
– The ability to connect to the gauge via USB, RS232, RS485 (2/4wire), and
Ethernet.
– The ability to configure communication ports A and B.
– The ability to configure the Ethernet port.
– The option to configure the system control setup.
– The option to display the system status.
– The option to configure the alarms and display the status of alarms.
– The option to configure the execution of system commands.
– The option to configure physical Input and Output setup and display the current
status of each.
– The option to configure detector setup.
– The option to configure density application setup.
– The option to flash application firmware to the gauge’s main board.
– Access to a gauge setup wizard for quick gauge configuration.
– Access to a calibration wizard to calibrate all physical inputs and outputs.
– An option to upload configuration from a gauge to the PC and save it to a file.
– An option to download a file configuration from a PC to the gauge.
– The option to enter a special password for cold and warm start operation.