Thermo Scientific DensityPRO NAI Series, User Manual

Page: 100 / 196

Operation
Application Screens
4
-
48 DensityPRO User Manual Thermo Scientific
5. Select a primary unit of measure from the Density Unit (Primary) dropdown. The
selection made on this tab will provide the unit information for the Action and
Measurement Data tabs.

g/cc – gram/cubic centimeter

lb/US gal – pound/US gallon (U.S. liquid)

lb/UK gal – pound/UK gallon (UK or imperial gal.)

lb/cu ft – pound/cubic foot

ston/cu yd – short ton (2000 pounds)/cubic yard

lton/cu yd – long ton (2240 pounds)/cubic yard

g/l – gram/liter

oz/cu in – ounce/cubic inch

lb/cu in – pound/cubic inch

g/cu in – gram/cubic inch

lb/cu yd – pound/cubic yard

kg/cu m – kilogram/cubic meter

deg API – degree American Petroleum Institute

degBaum lt – degree Baume, light scale

degBaum hv – degree Baume, heavy scale
6. Next, specify the unit of measure for the inside diameter of the pipe. The available
selections are:

cm – centimeter

mm – millimeter

in – inch

ft – foot

yd – yard

m – meter
7. Finally, enter the inside diameter of the pipe in the Pipe Inside Diameter textbox
and click the Submit button to save the data.