UltiMate 3000 Series:
AFC-3000 Automated Fraction Collector
Operating Instructions
Page
37
•
The folder contains the
2.08.24
folder (or a higher number) and further sub folders
and PDF files:
The installation instructions (PDF file) for the drivers can be found in
this folder. Install the drivers as described in the instructions for your operating
system.
Connecting a USB Cable
Tip:
Verify that Chromeleon is installed on the computer and that the license code is
entered
before
you connect the fraction collector to the Chromeleon computer.
To establish a connection via a USB cable:
1.
Turn on both the Chromeleon computer and the fraction collector.
2.
Plug one end of the USB cable into the USB port on the Chromeleon computer and the
other end to the USB port on the fraction collector.
Tips:
As an alternative, you can connect the fraction collector to the internal
USB port on another module in the UltiMate 3000 system that is
connected to the Chromeleon computer, or connect the fraction collector to
the Chromeleon computer via an external USB hub (
→
The USB standard limits the USB cable length to 5 meters. Each USB
device can be separated from the computer or next USB hub by no more
than 5 meters.
3.
The required drivers (USB Serial Converter and USB Serial Port) are usually found
and installed automatically (see below). If this is not the case, install the drivers
manually as described above under
Installing the Virtual COM Port on the
Windows Vista, Windows 7 and Windows Server 2008
will automatically detect the fraction collector and perform the USB installation. The
message "Your device is ready to use" appears. When you open the message, you can see
the number of the new virtual COM port (e.g., COM3).
Windows XP
will automatically detect the fraction collector and launch the
Found New Hardware
Wizard
, which guides you through the installation of the USB Serial Converter:
♦
If asked whether Windows can connect to Windows Update to search for software,
select
Yes, this time only
. If no internet connection is available, you must manually
install the drivers as described in section 2.2.
♦
Click
Finish
when the wizard reports that the software has been installed.
♦
The
Found New Hardware
Wizard
is launched again. Repeat the same steps for
installation of the USB Serial Port.
Summary of Contents for AFC-3000
