Refrigeration Service Operations
120
4. If no leaks are found, open the refrigeration
valves and place the unit in operation.
High Pressure Relief Valve
Removal
1. Remove the refrigerant charge.
2. Remove the high pressure relief valve.
Installation
1. Apply a refrigerant oil to the O-ring on the
high pressure relief valve.
2. Install and tighten the high pressure relief
valve.
3. Pressurize the refrigeration system and test for
leaks. If no leaks are found, evacuate the
system.
4. Recharge the unit with refrigerant.
Suction Pressure Regulator
Valve
Removal
1. Pump down the low side and equalize the
pressure to slightly positive.
2. Remove the remaining pressure and unsolder
the suction pressure regulator valve from the
accumulator tank and suction tube.
Installation
1. Clean the tubes for soldering.
2. Place the valve in position and solder the
connections.
3. Pressurize the low side and check for leaks.
4. If no leaks are found, evacuate the low side.
5. Open the refrigeration valves, and place the
unit in operation. Check the refrigerant charge
and add refrigerant as required.
Accumulator
Removal
1. Pump down the low side and equalize the
pressure to slightly positive.
2. Drain the engine cooling system.
3. Disconnect the water hoses.
4. Remove the mounting bolts from the
accumulator tank mounting brackets.
5. Unsolder the refrigerant lines from the tank.
6. Lift the accumulator tank from the unit.
Installation
1. Place the accumulator in the unit.
2. Install the mounting bolts loosely.
3. Solder the refrigerant tubes to the accumulator
tank.
4. Tighten the accumulator tank mounting bolts.
5. Pressurize the low side and test for refrigerant
leaks.
6. If no leaks are found, evacuate the low side.
7. Connect the water hoses and refill the engine
cooling system (see Engine Maintenance).
8. Open the refrigeration valves and place the
unit in operation. Check the refrigerant charge
and the compressor oil and add as required.
CAUTION: Do not stand under the
accumulator tank when removing the
suction line. The tank or the suction line
may leak oil.
Summary of Contents for MD-MT
