manualshive.com logo in svg

Thermo Electron Nicolet 4700, User Manual

Share
Download
Thermo Electron Nicolet 4700 User Manual Download Page 87

 

 

Accessories 

 

 
 
This chapter briefly describes the types of sampling and system 
accessories that are available for your spectrometer. Complete 
descriptions and operating instructions are included with the 
accessories. 
 

 

Smart Accessories 

In addition to traditional accessories, a variety of Smart Accessories 
are available for your spectrometer. Nicolet FT-IR spectrometers 
identify each Smart Accessory as it is installed and set the software 
parameters for data collection. Also, a series of spectral quality 
checks are performed to ensure that the accessory is installed and 
operating correctly. 

 

 

Detailed tutorials for installing, operating and maintaining each 
Smart Accessory are provided on-line. To start a Smart Accessory 
tutorial, click Sampling Techniques in the Help menu and then click 
the accessory name. 

 

Smart ARK

 

 – This is a horizontal ATR (attenuated total reflection) 

accessory with high stability, complete purge capabilities, tool-free 
alignment and high performance specifications. It includes integral 
purge tubes that seal the accessory from the atmosphere, and a cast 
aluminum body for exceptional stability. 
 

Smart Collector

 

 – Diffuse reflection enables analysis of highly 

light-scattering solids that are difficult to analyze using transmission 
techniques. This method is also useful when the sample, usually a 
powder, must be analyzed without modification. 
 

Nicolet FT-IR User’s Guide       81

 

Summary of Contents for Nicolet 4700











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands