manualshive.com logo in svg

Thermo Electron Nicolet 4700, User Manual

Share
Download
Thermo Electron Nicolet 4700 User Manual Download Page 139

 

Follow these steps to perform the performance test: 

 

1.  Make sure the main sample compartment is empty. 

 
 

Remove any samples and sampling accessories (except a 
transmission sample holder). 

 
 

2. Exit 

OMNIC. 

 
 

This ensures that the Bench Diagnostics software will run 
correctly. 

 
 

3.  Start the Bench Diagnostics software. 

 
 

To do this, click the Start button on the Windows taskbar, point 
to Programs (All Programs in Windows XP), point to the 
Thermo Nicolet folder and then choose Bench Diagnostics. 

 

 

See “Performing advanced diagnostic tests” in the 
“Troubleshooting Hardware Problems” chapter for more 
information about running the diagnostics software. 

 

 
4.  Click the Performance Tests button and then follow the 

instructions that appear on the screen.  

 

 Note 

If the noise readings are greater than normal or have changed 
significantly, call the Thermo Electron Technical Support for 
assistance. Outside the U.S.A., call your local service representative. 
Telephone numbers for all Thermo Electron offices are provided 
with your system. 

S

 

 

 

If special performance tests are available for your spectrometer, 
a button labeled “Extended Tests” (or another appropriate name) 
will appear. Click this button and follow the instructions that 
appear on the screen to perform the tests. 

Nicolet FT-IR User’s Guide       133

 

Summary of Contents for Nicolet 4700











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands