manualshive.com logo in svg

Thermo Electron Nicolet 4700, User Manual

Share
Download
Thermo Electron Nicolet 4700 User Manual Download Page 23

 

Checking 

the desiccant 

 

 

If your spectrometer is sealed and desiccated, a bag of desiccant is 
located under the beamsplitter compartment cover. The desiccant 
protects the beamsplitter and other optical components by reducing 
the amount of water vapor inside spectrometer. See “Checking and 
changing desiccant” in the “Maintaining your spectrometer” book in 
Spectrometer Help Topics if you need to change the desiccant. 

 

 

If your spectrometer is in use

, check the humidity level inside it 

monthly (more often in very humid climates) by clicking the Check 
Desiccant button on the Diagnostic tab of the Experiment Setup 
dialog box. If the level exceeds the factory-specified limit, a 
message informs you. Be sure to change the desiccant so that the 
optics will be protected. 

 

 

If your spectrometer is in storage

, check the round, blue indicator on 

the desiccant holder under the beamsplitter compartment cover 
monthly. Change the desiccant if the indicator has turned pink. Keep 
all covers closed tightly while the spectrometer is in storage. 

 

 Note 

The Check Desiccant button measures humidity more accurately 
than the indicator. For this reason you should rely on the button to 
monitor the performance of the desiccant when the spectrometer is 
in use. Rely on the indicator only when the spectrometer is in 
storage. 

S

 

 

 

See “Ordering parts” in Spectrometer Help Topics to find the part 
number for ordering desiccant bags. 

 
 

Nicolet FT-IR User’s Guide       17

 

Summary of Contents for Nicolet 4700











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands