Therma-Steem® Model XL1
January 14, 2019
8
a.
Freezing will severely damage the unit, internal components and hose.
WARNING:
Your Therma-Kleen Vapor Steam Cleaner MUST BE PLUGGED INTO A GROUNDED
OUTLET, or electrical shock can occur. Check with a certified
electrician if there is any doubt that the outlet is grounded. Do
not modify the Power Cord/Plug provided with the Therma-Kleen
Vapor System. If it will not fit the outlet, have a properly
grounded outlet installed by a certified electrician.
NOTE:
The 25 ft. length of the input power cord should not normally be increased. If
additional length is required, consult the national & local electrical codes and
ordinances as well as seeking the advice of a qualified electrical engineer before
proceeding.
WHY THIS UNIT MUST BE GROUNDED:
If the unit should malfunction or break down, grounding provides a path of least
resistance for the electrical current to pass, reducing the risk of electrical shock.
All Therma-Kleen units are equipped with a power cord with an equipment
grounding conductor. (Plugs are not normally supplied for higher voltage
machines). An appropriate plug must be inserted into an appropriate outlet
which is properly grounded in accordance with national & local electrical codes
and ordinances.
Therma-Kleen Model XL1 are designed for use with a normal 208/240, 480,
575 volt 3-phase grounded circuit.
OPERATING INSTRUCTIONS:
Note: See machine control panel for power requirements for your particular model prior
to operating this machine. Always wear gloves, goggles, and long sleeves and pants.
1.
Before plugging in the electrical cord, Check to insure ALL switches are in the
“OFF” position.
NOTE
:
when the machine is plugged into an electrical outlet, there is always
electrical power going to the machine.
