Therma-Steem® Model XL1
January 14, 2019
19
DETAIL & BLAST TOOLS:
Use
–
to clean small areas that are difficult or impossible to clean using any other
method. You will be able to clean arras which are too small to
clean with a tooth brush. Example
–
Faucets, Fixtures,
Dishwasher Edges, Stains in Carpets, Car Interiors, Deodorize,
Etc.
The detail
tool should almost always be used with the detail
brush attached to the end of the detail tool. has an
Exceptions to this are when cleaning condensers, radiators,
artificial plants and real pl
ants which are sprayed with a cool
vapor from a distance is the preferred method of cleaning.
Because of the increased pressure of the Model 400, the detail tool has a threaded end.
Operate this tool at ¼ volume. For best results first gently rub the surface with the end
of the tool, heating it. Make a second pass, after the surface in heated and dirt & debris
will be completely removed. Once clean wipe the surface with a dry absorbent cloth.
Clean hard to reach areas and corners first, then proceed with the appropriate larger
brush.
NYLON DETAIL BRUSH
1” Dia. 2
-
1/2” Dia
.
Use - to be used where there is a possibility of scratching the
surface, such as Bath Tubs, Door Jambs, Grout, Glass Shower
Doors (Pre-steam) Etc. When in doubt about which brush to
use, the Nylon brush first. This brush can generally be used
on almost any surface except on flat latex wall paint and
non-water proof ceiling tiles.
STAINLESS STEEL DETAIL BRUSH:
1” Dia.
2-
1/2” Dia.
Use - Stainless Steel is hard and should only be used on
surfaces that are scratch resistant. Always test in a small
area before proceeding. This brush can be used on
surfaces such as masonry, certain tiles such as Quarry tile
and high-quality stainless steel. This brush can be used to
remove some painted areas if the surface will undergo a sanding process prior to
repainting. If in doubt test an out of the way area first. The stainless-steel brush will
also leave a black mark, which is difficult to remove on certain types of tile.
