Themis RES-22XR3, Installation Manual

Page: 54 / 162

2-4
Themis Computer
RES-22XR3 Installation Manual - Configuration 1 Version 1.3
2.1.2.1 Installation
The following procedure explains how to install the DDR3 FBD Memory Modules.
1. Loosen and remove the eight (8) screws securing the air-flow deflector and
PCI card retainer bracket to the RES-22XR3 chassis (see
Figure 2-2 ).
• Screw A —After removing the single screw A, remove the PCI card
retainer bracket and store it in a safe place.
• Screw B— Remove the seven (7) M3x4 flathead screws marked “B” in
Figure 2-2 which will loosen the air-flow diverter so that it can be removed
from the system. After the air-flow diverter has been removed, the memory
module slots will be exposed (see
Figure 2-3 on page 2-5).
Figure 2-2. Remove Air-Flow Deflector Screws
A
B
PCI Card Retainer Bracket
B
B
B
B
B
B