Themis RES-22XR3, Installation Manual

Page: 48 / 162

1-18
Themis Computer
RES-22XR3 Installation Manual - Configuration 1 Version 1.3
Rear Access —Accessing the I/O connectors and PCI cards on the rear of the RES-
22 requires opening the rear sound baffle door. To do this, loosen the four (4) captive
knurled Phillips screws
A holding the baffle door to the chassis and swing the door
downward away from the chassis, exposing the rear connectors and PCI cards.
Removing the protective top cover for access to the interior requires that the rear
sound baffle be totally removed (this can be done with the baffle door closed). To do
this, five (5) M3x4 flathead Phillips screws
B must be removed, two on each side of
the baffle and one (captive) in the middle on the top (see Figure 1-7 ).
After removing the rear baffle, the top cover can be removed as described in Section
2.1.1, “Remove Protective Top Cover,” on page 2-1 (Chapter 2, "Installation and
Operation").
Figure 1-7. RES-22XR3 with Rear Sound Baffle Installed (Rear View)
Rear Sound Baffle
A A A A
B
B
Right Side
B
B
B
Left Side
Rear Rear