Themis RES-22XR3, Installation Manual

Page: 34 / 162

RES-22XR3 Installation Manual - Configuration 1 Version 1.3
1-4
Themis Computer
The RES-22XR3 front panel houses eight removable storage drive bays (see Figure
1-3 ). Both motherboards support SATA II drives, but the X8DTH-6F motherboard
also supports SAS 2.0 drives, hence a combination of both SATA and SAS drives
may be installed (up to five SATA II storage drives with three SAS
)
. Additional
drives/combinations can be achieved by installing a PCI-E add-on card. Storage
drive requirements should be ordered at the time of purchase.
Also included on the front panel is a combination SATA CD-RW/DVD-ROM Slim-
line drive, an ON/OFF power button, and system LEDs (see
Figure 1-4 on
page 1-5). The rear panel contains I/O faceplates for seven PCI cards (graphics,
RAID, NIC, etc.), two power supply modules with latch locks and power-cord sock-
ets, and all I/O connectors (See
Figure 1-4 ).
Major internal components of the RES-22XR3 can be seen in the open top view
(cover removed) shown in
Figure 1-5 on page 1-6.
Figure 1-3. External Features of the RES-22 (Front and Rear)
Front View (Doors Removed)
Power Socket
(3-prong NEMA 15)
Dual Power Supplies
System Power
Power Supply
Latch Lock
ON/OFF Switch
CD-RW/DVD-ROM
Combo Slimline Drive
Rear I/O Panel (see Figure 1-4 , page 1-5)
17” (42.7 cm), 19” with Rack Mounts
20” (50.8 cm) deep
Rear View
Slot 1
Slot 7
Front LED Indicator Panel
(see Figure 1-4 on page 1-5)
Storage Drive (SAS/SATA II) - 8 Total
3.5”
(2RU)
PCI-Express 2.0 x8 (in x16 slot)
PS1
PS2
* SAS is supported directly from the
motherboard on X8DTH-6F only.
PCI-Express 2.0 x8 (in x16 slot)
PCI-Express 2.0 x8 (in x16 slot)
PCI-Express 2.0 x8 (in x16 slot)
PCI-Express 2.0 x8 (in x16 slot)
PCI-Express 2.0 x8 (in x16 slot)
PCI-Express 2.0 x8 (in x16 slot)
* Chassis supports a
total of 8 drives.