background image

 

rom your home PC. 

 enter your 

email address (i.e.: [email protected]), check Enable Wildcard, and 

4.

 

Wait for an email from www.dyndns.org. 

eous 

ient? 

lowing information: 

[email protected] 

b.

 

Password or DDNS Key: xxxx 

.org

 

d.

 

Enable wildcard? Select Yes 

vers (HTTPS) 

 

ver

3.

 

ions: Select User Defined 

nter 

192.168.1.100

 

443

 (the default HTTPS port setting on the 

4.

 

Test the HTTPS connection from another computer on the Internet 

a. From a remote computer, open your browser and enter 

dns.org

 

irewall (i.e. Norton Internet Security) and are having 

trouble connecting to the N3200PRO, you can try the following steps: 

 

 the program list, use the Add or 

 buttons to find it. 

NOTE 

Router setup will differ slightly 

use the Asus WL500g because i

depending on router used. For this example, we will 

t has support for Dynamic DNS. Contact your router 

hardware vendor for setup help. 

 

Part I 

- Setup a DynDNS Account 

 

1.

 

Go to 

http://www.dyndns.org

 f

2.

 

Click on the Sign Up Now link. 

3.

 

Check the Check boxes, select a user name (i.e.: N3200PRO),

create a password (i.e.: xxxx). 

5.

 

Open the email and click on the link to activate your account 

Part II - Enable DDNS on the Router 

 

1.

 

Go to the router setup screen and select IP Config > Miscellan
DDNS Setting
 from your Home PC. 

2.

 

Click on Yes for Enable the DDNS Cl

3.

 

Select 

www.dyndns.org

4.

 

Go to router setup screen, and enter the fol

a.

 

User Name or E-mail Address: xx

c.

 

Host Name: 

www.N3200PRO.dyndns

e.

 

Update Manually: Click Update 

Part III - Setting up Virtual Ser

1.

 

Navigate to NAT Setting > Virtual Ser

2.

 

For Enable Virtual Server?, select Yes 

Setup the HTTPS Server 

a.

 

Well-Known Applicat

b.

 

Local IP: E

c.

 

Port Range
N3200PRO) 

d.

 

Protocol: select TCP 

e.

 

Click Add

f.

 

Click Apply

 

https://www.N3200PRO.dyn

b.

 

You should see the login page of N3200PRO. 

 

Firewall Software Configuration 

If you are using a software f

 

1.

 

Double click the NIS icon on system tray, and then configure the 
Personal Firewall

2.

 

On the Programs page, find the SetupWizard.exe and change its 

permission to "Permit All". If it's not in
Program Scan

 

 
 

85 

Summary of Contents for N3200PRO







































































































Reviews: