Thecus N3200PRO User Manual Download

Page: 44 / 102

Reset to Factory Default Settings

From the System menu, choose the
Factory Default item and the Reset to

Factory Default screen appears. Press
Apply to reset the N3200PRO to factory

default settings. Press Cancel to go back to
the main menu.

WARNING

Resetting to factory defaults will not erase the data stored in the hard disks, but

WILL revert all the settings to the factory default values.

Upgrading System Firmware

From the System menu, choose the
Firmware Upgrade item and the

Firmware Upgrade screen appears.

Follow the steps below to upgrade your
firmware:

Use the Browse button to find the
firmware file.

Press Apply.

The beeper beeps and the Busy LED

blinks until the upgrade is complete.

NOTE

• The beeper only beeps if it is enabled in the System Notification menu.
• Check Thecus website for the latest firmware release and release notes.

• Downgrading firmware is not permitted.

WARNING

Do NOT turn off the system during the firmware upgrade

catastrophic result that may render the system inoperable.

process. This will lead to a

Summary of Contents for N3200PRO







































































































Search results

Summary of Contents for N3200PRO

Reviews:

Related manuals for N3200PRO

Brands by name

Popular brands

Thecus N3200PRO, User Manual

Search results

Summary of Contents for N3200PRO

Reviews:

Related manuals for N3200PRO

Brands by name

Popular brands