![background image](http://html.mh-extra.com/html/thecus/n3200pro/n3200pro_user-manual_1101422018.webp)
The N3200PRO will rotate these messages every three seconds on the LCD
display.
If the RAID array is in a degraded state, the LCD display will be stopped in display
mode and show which disk is degraded in the array:
RAID: Degraded [Disk #]
NOTE
USB Copy
The USB Copy function enables you to copy files stored on USB devices such as
USB disks and digital cameras to the N3200PRO with a press of a button. To use
USB copy, follow the steps below:
1.
Plug your USB device into an available USB port on the Front Panel.
2.
In Display Mode, press the Enter (
↵
).
3.
The LCD will display “
USB Copy?
”
4.
Press Enter (
↵
) and the N3200PRO will start copying USB disks connected
to the front USB port. The LCD will display the USB copy progress and
results.
Typical Setup Procedure
From the Web Administration Interface, you can begin to setup your N3200PRO
for use on your network. Setting up the N3200PRO typically follows the five steps
outlined below.
For more on how to use the Web Administration Interface, see Chapter 4:
System Management >
Web Administration Interface
.
Step 1: Network Setup
From the Web Administration Interface, you can configure the network settings of
the N3200PRO for your network. You can access the Network menu from the
menu bar.
For details on how to configure your network settings, refer to Chapter 4:
System Management >
Network Management
.
Step 2: RAID Creation
Next, administrators can configure their preferred RAID setting and build their
RAID volume. You can access RAID settings from the menu bar of the Web
Administration Interface by navigating to Storage > RAID.
For more information on configuring RAID, see Chapter 4: System
Management >
RAID Configuration
.
Don’t know which RAID level to use? Find out more about the different RAID
levels from
Appendix C: RAID Basics
.
Step 3: Create Local Users or Setup Authentication
Once the RAID is ready, you can begin to create local users for the N3200PRO, or
choose to setup authentication protocols such as Active Directory (AD).
18