33
34
35
36
09/20
Ensure the door supports are s�ll in
place.
Carefully li� the door back into posi�on
and securely a�ach the hinges to the
wall. Make sure the screws are flush
with the bracket face.
Flush
A�ach the Glass to Wall “h” seal to
hinged edge of the door.
Check the orienta�on is correct.
Leave the seal oversized. This will be
trimmed later.
A�ach the glass to glass bubble “h” seal
to the inline panel.
Check the orienta�on is correct.
Leave the seal oversized. This will be
trimmed later.
Inside Enclosure
Open Out
Inside Enclosure
Open In
From the inside, fully �ghten all screws.
VIEW 07
07/2019 V 2.2
