25
26
27
28
07/20
Using a 6mm high quality drill bit for a
clean and precise hole, drill the marked
areas and fully insert the wall plugs.
Professional Tip
If drilling ceramic tiles, place
masking tape on the tiles before
marking and drill through the
tape to prevent the drill bit from
skidding.
DO NOT use Hammer Action as
this will break the tiles.
Rea�ach the wall channel in its
previous posi�on, this �me use silicone
sealant as indicated. Run a bead of
silicone sealant down the back face to
create a water �ght seal.
Silicone
Run beads of silicone sealant down the
inside walls of the channel as shown.
Do not run too larger beads or fill the
channel with silicone.
It is very important to put a good
amount of silicone in the corner where
the wall channels meet the
underframe. This area needs to be
properly sealed to prevent any water
leakage.
VIEW 07
07/2019 V 2.2
