46
47
48
49
18/20
Using a sharp modelling knife, trim any
excess gasket material from the hinges
that may have squeezed out when
�ghtening. Take care not to scratch the
glass surface.
Trim
A�ach the handle if one is included.
Secure in place with the grub screws
provided. The handle should be
oriented so that the grub screws are
not visible when looking down on the
handle.
IMPORTANT: Apply silicone sealant as
shown below to where the fixed panels
meet the underframe on both sides,
between the underframe and the shower
tray (or �les), over the underframe top
on both ends and the wall channels and
wall, both inside and out.
This enclosure is NOT water �ght unless
this step is followed.
Underframe
Wall Channel
Fit all cover plates.
VIEW 07
07/2019 V 2.2