1
2
3
5
4
6
7
8
short end
short end
1. Start with a long frame (2), three anchor pins (26), one medium (17)
and one long axle shaft (16), one small gear wheel, and one medium
sprocket wheel (10).
3. Now you will combine the two frames together. Connect the axle
shafts with one medium sprocket wheel (10) and one small sprocket
wheel (9) to form two long axles.
5. For the other end’s attachment section, use four anchor pins (26) to
mount two short rods (4) to another short frame (3).
7. The two base plates (1) form the cargo bed. They are connected with
the two attachment plates (27) into a single continuous surface and
then placed on the framework.
2. Equip a second long frame (2) with the same components, except
use a small gear wheel (8) instead of the medium sprocket wheel.
4. Now connect the two side sections with a short frame (3) and align
the gear wheels on the axles.
6. Now attach the second frame to the side sections. The two small
crossways-mounted frames serve to stabilize the structure.
8. Insert three anchor pins (26) into each of two long frames (2). Attach
the engine (24) with engine shaft and a small sprocket wheel (9) to the
rear frame.
35
