1
2
3
5
4
6
7
8
short ends
1. Two long frames (2) connected together serve as the side sections.
Then insert four anchor pins (26) into the frames and attach a short
frame (3).
2. Now mount another long frame (2) on the anchor pins in your large
side section. Insert two more anchor pins (26) into this frame.
3. A long axle shaft (16) goes into the fourth hole of the frame. Place a
small gear wheel (8) onto one side and a medium gear wheel (7) onto
the other side. Then, put a small sprocket wheel (9) onto the long end.
4. The axle is lengthened with another long axle shaft (16). The axle
shaft’s short end goes into the small sprocket wheel.
5. For the rear axle, insert a long axle shaft (16) into the fourth hole
from the right. It is secured with a small gear (8) and a medium
sprocket wheel (10).
6. You will have to lengthen the rear axle as well. Slide on a small
sprocket wheel (9) and then insert a long axle shaft (16).
7. Now, mount the drive shaft. It is secured to the frame by a small
gear wheel (8) and a small sprocket wheel (9).
8. The drive shaft has to be lengthened too, although just with a
medium axle shaft (17). The two shafts are held together with a small
sprocket wheel (9).
31
