TH3D EZABL Pro Installation Manual Download Page 4 | Manualshive

Page: 4 / 23

background image

V2.1

–

1/12/2021 Need help? Visit

ContactUs.TH3DStudio.com

TH3D EZABL

™

Pro Installation Guide -

Copyright © 2021 TH3D Studio LLC

–

ALL RIGHTS RESERVED

4

Preparation

If you are not comfortable flashing your

printer’s

firmware, moving wires around, and/or taking your hotend

mount apart you should NOT be attempting this upgrade as you could damage the printer. Contact us with any

questions before hand if you are unsure of upgrading. Support covers the product itself. If you need assistance

with your slicer, tuning your machine, or other non-product related issues please check out our communities at

Community.TH3DStudio.com.

Before you begin you should have the following:

•

TH3D EZABL

™

Pro Kit

o

1x EZABL

™

Pro Control Box

o

Power Wire

o

1X EZABL

™

Pro

or

EZABL

™

Pro Mini Sensor (depends on your selection)

▪

EZABL

™

Pro Mini Sensors will have 2x Adapter Rings included

o

10X Zip Ties for Securing the Sensor Wiring

o

1X Micro Screwdriver for Adjusting the Sensor and Screw Terminals

•

Printed Parts to Mount the Sensor to your printer

o

We include a multitude of mounts in our Unified Firmware package in the

“

EZABL STL Files folder

”

. You can also use any custom ones if you know the

sensor offset values (this is noted in the firmware).

o

We offer printed parts if you do not want to print your own.
Prices are about $10-30 (depends on the mount) for an ABS printed mount. If
you want one please contact us with the STL files for a quote.

o

Small ones like the can be purchased on the EZABL Product page or separately
on our site in the Printed Parts section.

•

Latest copy of the Unified or Marlin firmware for your printer

o

We have firmware for over 20 different machines on our website for customers

–

Check your order email for download info or download from

Firmware.TH3DStudio.com.

o

If you have a custom printer see the notes on the firmware section for the Marlin
setup guide.

•

USB Cable to connect your printer to your PC to update the firmware

o

Your board MUST have the bootloader already flashed on it to perform this
update. Check our video guide page at Bootloader.TH3DStudio.com to flash the
bootloader.

If you are missing anything from the TH3D EZABL

™

Pro kit please visit

ContactUs.TH3DStudio.com.

Email support is included in the kit for setup, install, and firmware questions. Phone/Remote

Support is available at an additional charge.

«
...
2
3
4
5
6
...
»

Summary of Contents for EZABL Pro
























Reviews:

No comments

Related manuals for EZABL Pro

Brand: CAB Pages: 263

Brand: IBM Pages: 16

Brand: Oki Pages: 2

Brand: DataCard Pages: 25

Brand: Xerox Pages: 310

Brand: QMS Pages: 104

Brand: Oki Pages: 6

Brand: Oki Pages: 32

Brand: Oki Pages: 52

Brand: Oki Pages: 64

Brand: Oki Pages: 269

Brand: Oki Pages: 2

Brand: Oki Pages: 32

Brand: Oki Pages: 33

Brand: Oki Pages: 8

Brand: Oki Pages: 101

Brand: Oki Pages: 104

Brand: Oki Pages: 99

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands