IOM CRUZcontrol®
P/N: 90480009
Revision Date: 03/18/2019
Page
4
of
58
TGW Systems Policies
TGW Systems Equipment Warranty
TGW Systems warrants that the material and workmanship
entering into its equipment is merchantable and will be
furnished in accordance with the specifications stated.
TGW Systems agrees to furnish the purchaser without charge
any part proved defective within 2 years from date of
shipment provided the purchaser gives TGW Systems
immediate notice in writing and examination proves the claim
that such materials or parts were defective when furnished.
For drive components specific to XenoROL® (i.e. Xeno belts,
slave Xeno belts, drive spools, standard and speed-up, and
spacers), this warranty shall be extended to five years of
running use, provided the conveyors are applied, installed
and maintained in accordance with TGW Systems published
standards. Other than the above, there are no warranties
which extend beyond the description on the face hereof.
Consequential damages of any sort are wholly excluded.
The liability of TGW Systems will be limited to the
replacement cost of any defective part. All freight and
installation costs relative to any warranted part will be at the
expense of the purchaser. Any liability of TGW Systems
under the warranties specified above is conditioned upon the
equipment being installed, handled, operated, and
maintained in accordance with the written instructions
provided or approved in writing by TGW Systems.
The warranties specified above do not cover, and TGW
Systems makes no warranties which extend to, damage to
the equipment due to deterioration or wear occasioned by
chemicals, abrasion, corrosion or erosion; Purchaser's
misapplication, abuse, alteration, operation or maintenance;
abnormal conditions of temperature or dirt; or operation of the
equipment above rated capacities or in an otherwise improper
manner.
THERE ARE NO WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, EXTENDING BEYOND THOSE
SET FORTH IN THIS STATEMENT OF WARRANTY.
Rev 03/01/2019
TGW Environment Standards
TGW equipment is designed to be installed in a
clean, dry warehouse environment. Exposure to
extreme humidly, direct sunlight, blowing dirt or
rain can permanently damage some components
of TGW conveyor. In particular, the curing agents
in concrete are known to attack and degrade the
urethane conveyor components.
When installing conveyor on a new construction
site, be sure that the concrete is properly cured
before setting conveyor on it. In addition, if
conveyors are stored in the proximity of curing
concrete, proper ventilation must be used to direct
the curing agent fumes away from the conveyor.
Failure to comply with these guidelines will void
the TGW warranty on any failed components that
result from these environment issues.
03/01/2019
