TGB Hornet 50, Service Manual

Page: 6 / 86

6
1-4 General Inspection General Inspection and Adjustment
*
means adjustable.
Note: The ignition of ATV by the use of crank-shaft which is 2 ignitions/revolution.
Special attention should be paid while setting the turning speed of Engine by
Tachometer.
1-5 Notes for Inspection
ITEM INSPECTION DETAILS
1 Be aware of smoke and fire while performing maintenance.
2
New Packing, Gasket, O Ring, locking pin should be used while
assembling.
3 Only designated TGB oils should be used on spare parts.
4
Clean the vehicle before maintenance to avoid dirt or mud on
disconnected parts.
5
The locking sequence of Bolt and Nut should be from inside to
outside, or in diagonal step. Reverse the sequence to loose.
6
Special tools should be used when necessary.
7
Attention should be paid to avoid damage or loss of
disconnected parts. Clean and grease properly before the
assembly. No grease on Bolt's Thread.
8 Reconfirm each function after the assembly.
9
Special attention should be paid to the battery's electrolyte
and brake oil which will stam clothes.