TGB Hornet 50, Service Manual

Page: 55 / 86

55
4-3-2 Inspection of Engine Components
11. Inspection of Reed Valve:
A. There should be no clearance between the reed and the
reed valve seat.
B. Check for any break from the appearance. Replaced if
the flatness of contact suface exceeds 0.08mm.
12. Inspection of V-Belt:
A. There should be no oil stain, crack and unusual damage
from the appearance.
B. Replaced if the belt width is less than 15.0mm.
13. Inspection of Clutch Housing:
A. Inspect for any unusual damage and color change.
B. Replaced if the inside diameter exceeds 110.40nm.
14. Inspection of Clutch Spring:
A. Inspect crack and damage from the appearance.
B. Replaced when the free length at curved hook is above
25.5mm.
15. Inspection of CVT Spring:
Replaced if the free length of spring is less than 100mm.
16. Inspection of Clutch Lining:
A. Check for oil stain, crack and unusual damage from the
appearance.
B. Replaced if the thickness of lining is less than 2.0mm.
17. Inspection and Cleaning of Air Cleaner:
A. Remove the two slided hooks on Air Cleaner Cover.
B. Remove Screw and Filter.
C. Check for any damage and foreign material in the air cleaner.
Clean the inside of the air cleaner.
D. Clean the Filter with cleaning oil or diesel fuel.
E. Dry the Filter and soak in 10g of TGB Supper Oil
No. GA50400002.