TGB BLADE 500, Service Manual

Page: 37 / 306

2. MAINTENANCE INFORMATION
2-11
Steering Handle
Caution
Check all wires and cables if they are interfered
with the rotation of steering handle bar.
Lift the front wheel out of ground.
Turn handle from right to left alternative and
check if turning is smoothly.
If handle turning is uneven and bending, or the
handle can be operated in vertical direction, then
check the handle top bearing.
Wheel/Tire
Caution
Tire pressure check should be done as cold
engine.
Check if tire surface is ticked with nails, stones
or other materials.
Appointed tire pressure
Tire size Front Tire Rear Tire
Tire pressure as cold 7 psi 7 psi
Check if front and rear tires’ pressure is in
normal. Measure tire thread depth from tire
central surface. Replace the tire if the depth is
not come with following specification:
Front tire: 1.5 mm
Rear tire: 2.0 mm
Nuts, Bolts Tightness
Perform periodical maintenance in accord with
the Periodical Maintenance Schedule
Check if all bolts and nuts on the frame are
tightened securely.
Check all fixing pins, snap rings, hose clamp,
and wire holders for security.