MANUAL P/N 900000165 REV H
29
NTP SERVER
Sync.
Synchronised to source & serving time.
System peer <ip address>
Synchronisation source found. When this is the GPS
engine the IP address will be shown as 127.127.46.0
Acquiring sync
Locking to time source
No system peers
no valid synchronisation sources. Unit in holdover.
NTP suspend
NTP service suspended & will no longer answer NTP
requests. Part of the AUTO-OFF process.
NTP resume
NTP service resumed. Part of the AUTO-OFF process.
Initialising
Indicated on web status page only at startup before initial
time is loaded. This status is not logged and does not
cause a trap.
As long as there is a system peer then there should be no problem with the NTP service. If “no
system peers” is seen with a GNSS receiver then the GPS status will indicate the problem (see
above) otherwise with the peer-to-peer model the network connection to specified NTP servers
should be checked.
There is one other trap that can be issued, the cold-start trap. This will appear to be issued from
the ETH2 address.
5.6
Remote restart
There is a mechanism to remotely reboot the NTP80. From the SYSTEM page notice the small
‘_’ on the top left side of the page.
Summary of Contents for NTP80plus
Page 10: ...MANUAL P N 900000165 REV H 10 ...
