MANUAL P/N 900000165 REV H
20
5.2
Network Configuration
This page allows the configuration of each of the Ethernet ports. Select the port to configure
from the drop down list box. The current settings for that port will be shown.
The following settings are port specific:
IP
,
Gateway
,
Netmask
,
Speed
,
Duplex
DHCP
- Permit port to acquire its address via DHCP. This will be shown on the status
page.
Hostname
- The unit can be provided with a hostname for DHCP enabled ports. If changed
or set independently of the DHCP flag, it must be submitted for each of the
ports that DHCP has been enabled for.
SNMP Access
- Allows SNMP queries and traps to be generated.
HTTP
- Enable the web service on this interface. Note that it is not possible to disable
the web interface from all ports with this setting.
FTP
- Allow firmware updates
Support
- Allow remote access for factory support if there are any problems. This is not a
user accessible interface
Note that any changes must be submitted prior to changing the port selection otherwise they
will be lost. This includes the non-port specific settings.
Summary of Contents for NTP80plus
Page 10: ...MANUAL P N 900000165 REV H 10 ...
