38
reset to factory settings. After the “OK/MAX.MIN.” button has been
pressed and held for three seconds, the progress of the reset is
shown in % on the memory display. The KlimaLogg Pro
automatically restarts when the reset is complete.
Note:
Note that through the main reset also all recorded data will deleted. If
necessary, please ensure that there is no relevant data on the
KlimaLogg Pro that has not yet been retrieved or transferred to the PC.
If the device shows a malfunction, we recommend that you firstly check
the batteries and try a normal reboot of the unit. If this does not help, we
recommend that you do the main reset.
TRANSMITTERS:
•
If you use your logger with additional transmitters that were entered
into the logger during startup or via the learning mode, you see a
number in the channel display for every assigned channel.
•
After inserting the batteries in to the transmitter, the transmitter
automatically starts transferring the outdoor values.
•
After successful start up of the transmitter close the battery
compartment carefully.
•
In the normal view and as well as in history mode, you can scroll
up and down through the existing channels by pressing the + or -
button. A triangle is displayed above the currently selected channel
symbol, and the current channel values are displayed in the
temperature and humidity display area.
•
The compatible external transmitters (Kat.Nr. 30.3180.IT and
30.3181.IT) each have their own predefined serial numbers (four-
digit, alphanumeric). This serial number is printed on the respective
transmitter and is also briefly displayed on the transmitter’s display
when it is started up. The serial number is also displayed on the
text display (if the transmitter has been selected as the current one
on the KlimaLogg Pro). The PC software allows you to assign an
individual name to each channel (except for the logger’s own
measured values. The name “INDOOR” is always displayed with
these values.)
Note:
If you do not know for certain which transmitter is entered for which
channel in your individual channel designations, you can call up this
