44
•
With the HIST / DEL or OK / MAX.MIN. button you can toggle
through the different AlarmEvent-records (if available).
•
If you press the “ALM” button again, you return to the position
of the last showing AlarmEvent data set in the normal
HISTORY MODE.
•
Press and hold the “HIST/DEL” or “OK/MAX.MIN.” button for
fast forward scrolling through the data sets (steps of 50).
•
To enter normal mode again, press either SET button in
HISTORY-MODE or press no button for at least 2 minutes.
PC CONNECTION:
Note:
The required PC software can be downloaded free from the
download page of the TFA homepage (www.tfa-dostmann.de).
The KlimaLogg Pro can record up to 50,000 data sets and can also
transfer them to a PC using the included USB wireless transceiver
(Kat.Nr. 30.3175).
A ring memory is used. That means that when all data sets have been
written, the oldest existing data sets is automatically overwritten by the
next new data set. On the memory indication, the logger displays the
amount of data sets that has not yet been transferred to a PC (in
percentage).
Synchronisation:
The KlimaLogg Pro has a USB button. When the PC software requests
that synchronization be started, please press and hold the USB button
on the KlimaLogg Pro for three seconds until a brief beep is heard and
the USB symbol on the toolbar flashes. The synchronization must then
be confirmed in the PC software.
If the synchronization is successful, another beep sounds and the USB
symbol is displayed steadily. The KlimaLogg Pro starts to transfer his
datas to the PC.
Initiate contact:
Synchronization is only required once in order to assign the logger to the
software. In order to initiate contact to the software during the next start,
it is only necessary to press the USB button once. The KlimaLogg Pro
