41
The recorded data sets can be called up in history mode or transferred to
a PC using the USB wireless transceiver.
MAX./MIN VALUES AND THE CURRENT DEW POINT in the selected
channel:
•
Press OK/MAX/MIN button in normal mode.
•
MAX appears in the display and the highest humidity is
displayed.
•
Press the button again.
•
The highest temperature is displayed.
•
Press OK/MAX/MIN button again.
•
MIN appears in the display and the lowest humidity is
displayed.
•
Press the button again.
•
The lowest temperature is displayed
•
Press the button again.
•
DEW appears in the display.
•
The current dew point is displayed.
•
The time and date when the respective value was determined
are also displayed.
•
The corresponding channel number is shown on the channel
display, and the assigned name or the serial number of an
entered transmitter is displayed.
•
To clear the recorded max.min.-values, please press and
hold OK/MAX/MIN button for three seconds in any mode.
•
The max./min. values will be deleted for all channels.
•
The display shows the current temperature and humidity at
all channels.
Note:
Max./min. values are not recorded in a data set.
Only the current max./min. values are displayed in the PC software.
ALARM SETTING MODE:
•
Press and hold the ALM button for the three seconds.
•
HIGH AL RH for the selected channel appears in the display.
•
The upper alarm limit for the humidity is flashing.
•
With the ALM button you can select one possible alarm limit
after the other: