Radio controlled alarm
Radio controlled alarm
15
14
• Press “MODE” button to confirm it.
• Hold “
▲
” button in normal mode to change between DCF-Time
and time zone (Display “F”).
6. Backlight
• To activate/turn off the backlight, press and hold “LIGHT/SNOOZE”
button.
• The symbol appears or disappears on the display.
• Is the backlight activated, the symbol appears on the display and it
automatically turns on at night.
7. Battery replacement
• Replace the batteries when the display becomes weak.
• Use alkaline batteries only. Observe correct polarity. Low batteries
should be changed soon to avoid the damage resulting from a
leaking battery. Batteries contain harmful acids. Wear protective
glasses and gloves when handling with leaked batteries.
Attention:
Please do not dispose of old electronic devices and empty batter-
ies in household waste. To protect the environment, take them to
your retail store or to appropriate collection sites according to
national or local regulations.
8. Maintenance
• Keep the instrument in a dry place.
• Do not expose the instrument to extreme temperatures, vibration
or shock.
• Clean it with a soft damp cloth. Do not use solvents or scouring
agents.
• Avoid placing the instrument near interference sources/metal
frames such as computer or TV sets.
4.2 Alarm setting
• Select your desired alarm by “MODE” button:
• Alarm 1
• Alarm 2
• Set the alarm time in the desired alarm mode. Hold “MODE”
button for 3 seconds. The hour digits are flashing. Press “
▼
” or
“
▲
” button to adjust the time. Confirm with “MODE” button. Set
minutes in the same way. Confirm with “MODE” button and the
alarm is activated. If necessary adjust the second alarm time in the
same way.
• To activate or deactivate the alarm function press “ALARM”
button.
,
,
+
or no alarm symbol is shown on the LCD.
• Once the alarm starts to ring, you can stop the alarm by pressing
“ALARM” button.
• You can activate the snooze function by pressing the “LIGHT/
SNOOZE” button on the top. Zz appears and the alarm will be
interrupted for 4 minutes.
4.3 Dual time setting
• Select dual time by “MODE” button.
• Hold “MODE” button. The hour digits are flashing. Press “
▼
” or
“
▲
” button to adjust the time.
• Confirm with “MODE” button.
• Set minutes in the same way.
• Confirm with “MODE” button.
5. Manual time setting with time zone
• The time zone is used for the countries where the DCF signal can
be received but the time zone is different from the DCF time.
• Hold “
▲
” button in normal mode and “F” appears on the LCD.
• Hold “WAVE” button and the hour digits are flashing.
• Press “
▼
” or “
▲
” buttons to adjust hours.
TFA_No. 60.2501 Anleitung 06_10 18.06.2010 9:46 Uhr Seite 8
