Texmate, Inc. Tel. (760) 598-9899 • www.texmate.com
Page 44
Apr-08-2016 GI-50 320 DS (NZ308)_UL April 2016
Case Dimensions
Panel adaptor
plates are
available to
retrofit most
existing panel
cutouts.
8mm
(0.31")
65.8mm
(2.6")
Mosaic Fitting
14mm
(0.55")
130.47mm
(5.15")
66.9mm
(2.63")
SIDE VIEW
9/32 DIN
Cutout spacers
Top & Bottom
Right-angled
Connectors
FRONT VIEW
72mm
(2.84")
144mm
(5.69")
9/32 DIN 144x72mm
5mm
(0.2")
typical
0
10
20
30
40
50
60
70
80
90
100
These dimensions are increased
by 2mm (0.08") when the metal
surround case is installed
.
Case will mount in standard DIN cutouts
PANEL CUTOUT
Snug Fitting
Mosaic Fitting
138mm
(5.44")
Loose Fitting
136.85mm
(5.41")
65.8mm
(2.6")
135.5mm
(5.35")
2.0mm
(0.8")
67.75mm
(2.64")
9/32
DIN
Cutout spacers
68mm
(2.68")
8 places
2.0mm
(0.8")
8 places
48mm
(1.9")
135.5mm
(5.35")
140.7mm (5.54")
144mm
(5.69")
4.3mm
(0.17")
136.85mm
(5.41")
TOP VIEW
Max. panel thickness
4mm
(.16")
9/32 DIN Cutout spacers
9/32 DIN
Cutout spacers
To open rear cover,
use a small flat blade
screw driver.
Press down lightly to
release catch on top
or bottom of case and
leaver outwards.
Mosaic
Fitting
14mm
(0.55")
Screw Mount Clip position
when using metal surround
Connector
Socket
146.6mm
(5.77")
Metal Surround Case
P/N:(OP-MTL144X72)
NOTE: The Metal Surround
Case is pre-installed at the
factory and cannot be
removed without damage
to the case.
Various bezel
colors are available.
Black is standard.
Two Screw Mount Clips
are supplied as standard with
this case. For replacement
Screw
Mount Clips,
Order P/N.(OP-MTLCLIP)
Pr
og
.
For extra strength in portable applications, the 8 DIN
spacers should be snipped off and the
Mosaic fitting
cutout used. Alternatively, the
High Strength
Panel
Mounting Kit
can be used.
WARRANTY
Texmate warrants that its products are free from defects in material and workmanship under
normal use and service for a period of one year from date of shipment. Texmate’s obligations
under this warranty are limited to replacement or repair, at its option, at its factory, of any of
the products which shall, within the applicable period after shipment, be returned to Texmate’s
facility, transportation charges pre-paid, and which are, after examination, disclosed to the sat-
isfaction of Texmate to be thus defective. The warranty shall not apply to any equipment which
shall have been repaired or altered, except by Texmate, or which shall have been subjected
to misuse, negligence, or accident. In no case shall Texmate’s liability exceed the original pur-
chase price. The aforementioned provisions do not extend the original warranty period of any
product which has been either repaired or replaced by Texmate.
USER’S RESPONSIBILITY
We are pleased to offer suggestions on the use of our various products either by way of printed
matter or through direct contact with our sales/application engineering staff. However, since
we have no control over the use of our products once they are shipped, NO WARRANTY
WHETHER OF MERCHANTABILITY, FITNESS FOR PURPOSE, OR OTHERWISE is made
beyond the repair, replacement, or refund of purchase price at the sole discretion of Texmate.
Users shall determine the suitability of the product for the intended application before using,
and the users assume all risk and liability whatsoever in connection therewith, regardless of any
of our suggestions or statements as to application or construction. In no event shall Texmate’s
liability, in law or otherwise, be in excess of the purchase price of the product.
Texmate cannot assume responsibility for any circuitry described. No circuit patent or software
licenses are implied. Texmate reserves the right to change circuitry, operating software, speci-
fications, and prices without notice at any time.
For product details visit www.texmate.com
Local Distributor Address
450 State Place • Escondido, CA 92029
Tel: 1-760-598-9899 • USA 1-800-839-6283 • That’s 1-800-TEXMATE
Fax: 1-760-598-9828 • Email: [email protected] • Web: www.texmate.com
Texmate has facilities in Japan, New Zealand, Taiwan, and Thailand.
Copyright © 2004-2016 Texmate Inc. All Rights Reserved.
