Apr-08-2016 GI-50 320 DS (NZ308)_UL April 2016
Page 3
Texmate, Inc. Tel. (760) 598-9899 • www.texmate.com
Inputs
Inputs Available:
More than 120 single, dual, triple
and quad input signal conditioners available covering
all types of analog, digital and mixed input signals.
Accuracy:
Tiger 320 PMCs enable the user to estab-
lish any degree of system accuracy required. Built-in
compensation and linearization functions enable sys-
tem accuracies of the order of ±0.0001% of reading for
analog inputs. Stop -Start time resolution from ±1sec
to ±0.7nsec. Digital input and pulse counts ±1 count.
A/D Convertors:
A Dual Slope, bipolar 17 bit A/D
is provided as standard on the main board. SMART
modules can have 24 bit or 16 bit Delta-Sigma A/D
convertors that utilize the internal I2C BUS.
Temperature Coefficient:
Typically 30ppm/˚C.
Compensation can be utilized to achieve system tem-
perature coefficients of 1ppm.
Warm Up Time:
Up to 10 minutes, depending on
input module.
Conversion Rate:
Typically 10 samples per second.
However, SMART input modules are available that can
convert at 60, 240, 480 or 960 samples per second.
Control Output Rate:
Can be selected for 100msec
or 10msec. Some SMART modules have SSR outputs
that react within 1.2msec.
Excitation Voltage:
Depends on input module select-
ed. Typically, 5V, 10V or 24VDC is provided.
Outputs
(See pages 38-39 for pinouts and details of modular
construction)
Standard Carrier Board:
Is available without a serial
output, or with either an isolated RS-232 or an isolat-
ed RS-485 (RJ-6 socket).
Two Isolated Analog Output Options:
Mounted on any
carrier board.
1. Single Analog Output:
Fully scalable from 4 to
20mA or 0 to 20mA (or reverse) and selectable for 0
to 10VDC (or reverse).
2. Dual Analog Output:
Fully scalable from 0 to 10VDC
(or reverse).
Analog Output Specifications:
Accuracy: 0.02%
FS. Resolution: 16-bit Delta-Sigma D/A provides
0.4µA on current scaling, 250µV on voltage scaling.
Compliance: 500
Ω
maximum for current output.
500
Ω
minimum for voltage output. Update Rate:
Typical 7 per second. Step Response: Typical
6msec to a display change. Scalable: From 1 count
to full scale.
Outputs continued
Seven I/O Modules:
Plug into any carrier board from
rear.
1. Four Relay Module:
Available in six combinations
from one relay up to a total of two 9/10A Form C
Relays* and two 4/5A Form A Relays**.
2. Four Relay Module:
Available with one to four 5A
Form A Relays**.
3. Six Relay Module:
Available with five or six 4A Form
A Relays**.
*Form C Relay Specifications:
9/10A 240VAC~1/2
HP, 8A 24VDC. Isolation 3000V. UL and CSA listed.
**Form A Relay Specifications:
4/5A 240VAC, 4A
24VDC. Isolation 3000V. UL and CSA listed.
4. Four Solid State Relay (SSR) Module:
Available with
one to four independent (210mA DC only) SSRs (300V
max).
5. Six Output 5VDC / TTL or Open Collector:
Available
with 0 to 5VDC (50 mA) or 0 to V+ (5VDC max, 50
mA).
6. Opto Isolated I/O Module:
Available in either 6 Outputs
& 6 Inputs, or 16 Outputs and 6 Inputs. For connection
to an external breakout box.
7. Flash Card Memory Module:
Available with 8 or 16
MB memory.
Power Supplies
Auto sensing AC/DC (DC to 400Hz) hi volts std, low
volts optional.
PS1 (standard):
95-300VDC / 85-265VAC, 50-400Hz,
2.5W nominal
PS2 (optional):
10-72VDC / 14-48VAC, 50-400Hz,
2.5W nominal.
Environmental
(See Rear page for IP-65 & NEMA-4
options)
Operating Temperature:
0 to 50 ˚C (32 ˚F to 122 ˚F).
Storage Temperature:
-20 ˚C to 70 ˚C (-4 ˚F to 158
˚F).
Relative Humidity:
95% (non-condensing) at 40 ˚C
(104 ˚F).
Mechanical
(See Rear page for more details)
Case Dimensions:
9/32 DIN, 144x72mm (5.69” x
2.84”)
Case Material:
94V-0 UL rated self-extinguishing
polycarbonate.
Weight:
11.5 oz (0.79 lbs), 14 oz (0.96 lbs) when
packed.
Certifications and Listings
CE:
As per EN-61000-3/4/6 and EN-61010-1.
UL:
E469078
Specifications continued
