16
3-2. Acquisition Commands
3-2-1. :ACQuire:AVERage.................................................................................. 16
3-2-2. :ACQuire:MODe ....................................................................................... 16
3-2-3. :ACQuire<X>:MEMory? ........................................................................... 17
3-2-4. :ACQuire:FILTer:SOURce ........................................................................ 18
3-2-5. :ACQuire:FILTer ....................................................................................... 19
3-2-6. :ACQuire:FILTer:FREQuency .................................................................. 19
3-2-7. :ACQuire:FILTer:TRACking ...................................................................... 19
3-2-8. :ACQuire<X>:STATe? .............................................................................. 20
3-2-9. :ACQuire:RECOrdlength .......................................................................... 20
3-2-10. :HEADer................................................................................................. 21
3-2-1. :ACQuire:AVERage
Set
Query
Description
Selects or returns the number of waveform acquisitions
that are averaged in the average acquisition mode.
Syntax
:ACQuire:AVERage {<NR1>| ?}
Related Commands :ACQuire:MODe
Parameter
<NR1> 2, 4, 8 ,16, 32, 64, 128, 256
Note
Before using this command, select the average
acquisition mode. See the example below.
Example
:ACQuire:MODe AVERage
:ACQuire:AVERage 2
Selects the average acquisition mode, and sets the
average number to 2.
3-2-2. :ACQuire:MODe
Set
Query
Description
Selects or returns the acquisition mode.
Syntax
:ACQuire:MODe {SAMPle | PDETect | AVERage | ?}
Related Commands :ACQuire:AVERage
Parameter
SAMPle Sample mode sampling
PDETect Peak detect sampling
AVERage Average sampling mode
Example
:ACQuire:MODe PDETect
Sets the sampling mode to peak detection.
