TEXIO DCS-2000E SERIES, Programming Manual

Page: 148 / 180

145
3-21-38. :SEARCH:TRIGger:BUS:B1:CAN:IDentifier:MODe
Set
Query
Description Sets or returns the CAN addressing mode for the bus.
Syntax :SEARCH:TRIGger:BUS:B1:CAN:IDentifier:MODe
{STANDard|EXTended|?}
Parameter/ Return
parameter STANDard Standard addressing mode
EXTended Extended addressing mode
Example :SEARCH:TRIGger:BUS:B1:CAN:IDentifier:MODe?
>STANDARD
:SEARCH:TRIGger:BUS:B1:CAN:IDentifier:MODe
EXTENDED
:SEARCH:TRIGger:BUS:B1:CAN:IDentifier:MODe?
>EXTENDED
3-21-39. :SEARCH:TRIGger:BUS:B1:CAN:IDentifier:VALue
Set
Query
Description Sets or returns the binary address string used for the
CAN search trigger.
Note: Only applicable when the search trigger condition
is set to ID or IDANDDATA.
Syntax :SEARCH:TRIGger:BUS:B1:CAN:IDentifier:VALue
{<string>|?}
Related
Commands :SEARCH:TRIGger:BUS:B1:CAN:IDentifier:MODe
Parameter/ Return
parameter <string> The size of the string depends on the data
size setting. The string must be enclosed
in double quotes, “string”.
String contents:
x = don’t care
1 = binary 1
0 = binary 0
Example :SEARCH:TRIGger:BUS:B1:CAN:CONDition ID
:SEARCH:TRIGger:BUS:B1:CAN:IDentifier:MODe
STANDARD
:SEARCH:TRIGger:BUS:B1:CAN:IDentifier:VALue
"01100X1X01X"
:SEARCH:TRIGger:BUS:B1:CAN:IDentifier:VALue?
>01100X1X01X