75
3-12. Run Command
3-12-1. :RUN ...................................................................................................... 75
3-12-2. :STOP .................................................................................................... 75
3-12-3. :SINGle .................................................................................................. 75
3-12-4. :FORCe .................................................................................................. 75
3-12-1. :RUN
Set
Description
The run command allows the oscilloscope to continuously
make acquisitions (equivalent to pressing the Run key on
the front panel).
Syntax
:RUN
3-12-2. :STOP
Set
Description
The stop command stops the oscilloscope making further
acquisitions (equivalent to pressing the Stop key on the
front panel).
Syntax
:STOP
3-12-3. :SINGle
Set
Description
The single command allows the oscilloscope to capture a
single acquisition when trigger conditions have been
fulfilled (equivalent to pressing the Single key on the front
panel).
Syntax
:SINGle
3-12-4. :FORCe
Set
Description
The Force command forces an acquisition (equivalent to
pressing the Force-Trig key on the front panel).
Syntax
:FORCe
