2.
Next, the front panel displays
“Restoring Data” and cycles
between a progress bar and an
estimated time until completion.
Administrators may use this to
determine how much time before
the system is on-line. This
information is also available
through the Text Management
Interface. This process will take
approximately five minutes for a
fully loaded system.
If all system LUNs are set to
Volatile mode, the front panel
displays “Initializing” instead of
“Restoring Data.”
3.
Once the system has restored
data, the front panel displays
“System Status: GOOD” and
shows the performance bars for
each Fibre Channel port. The
number represents the Fibre
Channel Controller. The top bar
represents port A and the bottom
bar represents port B.
Restoring Data ... 73.8%
Restoring Data ... 73.8%
Est. Time Left
01:03
System Status:
GOOD
1==-
The system is now ready for normal operation.
RamSan-120
User’s Manual
- 9 -