5.1.2
Identifying a RamSan
When you have more than one RamSan, the “Identify Device”
feature helps you to physically locate which RamSan you are
monitoring. This feature blinks the front panel display. The
following demonstrates how to make the front panel display start
and stop blinking.
Via Web Interface
To make the RamSan front panel blink via web interface:
•
Click on the “Management Control Processor” graphic
•
Click on the “General Info” tab
•
Click the “Identify Device” button
The RamSan front panel will begin to blink. To make the front
panel stop blinking, press any button on the front panel or click the
“Identify Device” button again.
Figure 5-1: Identify Device button
RamSan-120
User’s Manual
- 39 -