Setting SCSI device identifiers
This allows a user to set an SCSI device identifier between 1 and
255. This value is usually only used in OpenVMS.
•
From the Telnet Main Menu, select “LUN Setup”
•
Select “Modify LUN(s)”
•
Select LUN (See instructions in Section 6.5 )
•
Select “Set SCSI device identifier”
•
Enter a unique device identifier from 1 to 255 and press
[ENTER].
•
Select “Exit to the LUN configuration menu”
•
To save the changes once you have completed all LUN
configuration, select “Save changes and exit”
Figure 6-13: Setting SCSI Device Identifier
RamSan-120
User’s Manual
- 70 -
