![background image](http://html1.mh-extra.com/html/texas-instruments/tms320c6472/tms320c6472_user-manual_1095288079.webp)
www.ti.com
MDIO Registers
4.4
PHY Acknowledge Status Register (ALIVE)
The PHY acknowledge status register (ALIVE) is shown in
Figure 31
and described in
Table 24
.
Figure 31. PHY Acknowledge Status Register (ALIVE)
31
16
ALIVE
R/WC-0
15
0
ALIVE
R/WC-0
LEGEND: R/W = Read/Write; R/WC = Read/Write 1 to clear; -n = value after reset
Table 24. PHY Acknowledge Status Register (ALIVE) Field Descriptions
Bit
Field
Value
Description
31-0
ALIVE
MDIO Alive bits. Each of the 32 bits of this register is set if the most recent access to the PHY with
address corresponding to the register bit number was acknowledged by the PHY; the bit is reset if
the PHY fails to acknowledge the access. Both the user and polling accesses to a PHY will cause
the corresponding alive bit to be updated. The alive bits are only meant to be used to give an
indication of the presence or not of a PHY with the corresponding address. Writing a 1 to any bit
will clear it, writing a 0 has no effect.
0
The PHY fails to acknowledge the access.
1
The most recent access to the PHY with an address corresponding to the register bit number was
acknowledged by the PHY.
79
SPRUEF8F – March 2006 – Revised November 2010
C6472/TCI6486 EMAC/MDIO
Submit Documentation Feedback
Copyright © 2006–2010, Texas Instruments Incorporated