manualshive.com logo in svg

Texas Instruments THS1031, Manual

The Texas Instruments THS1031 is a high-performance operational amplifier designed for precision analog signal processing applications. With our user-friendly manual available for download, you can effortlessly maximize the potential of this product. Find the free manual at manualshive.com and unlock endless possibilities for your analog signal processing needs.

Share
Download
background image

THS1031

3-V TO 5.5-V, 10-BIT, 30 MSPS

CMOS ANALOG-TO-DIGITAL CONVERTER

 

SLAS242E – NOVEMBER 1999 – REVISED MARCH 2002

1

POST OFFICE BOX 655303 

•

 DALLAS, TEXAS 75265

D

10-Bit Resolution, 30 MSPS
Analog-to-Digital Converter

D

Configurable Input Functions:
–  Single-Ended
–  Single-Ended With Analog Clamp
–  Single-Ended With Programmable Digital

Clamp

–  Differential

D

Built-In Programmable Gain Amplifier
(PGA)

D

Differential Nonlinearity:

±

0.3 LSB

D

Signal-to-Noise: 56 dB

D

Spurious Free Dynamic Range: 60 dB

D

Adjustable Internal Voltage Reference

D

Straight Binary/2s Complement Output

D

Out-of-Range Indicator

D

Power-Down Mode

     

description

The THS1031 is a CMOS, low-power, 10-bit, 30 MSPS analog-to-digital converter (ADC) that can operate with
a supply range from 3 V to 5.5 V. The THS1031 has been designed to give circuit developers flexibility. The
analog input to the THS1031 can be either single-ended or differential. This device has a built-in clamp amplifier
whose clamp input level can be driven from an external dc source or from an internal high-precision 10-bit digital
clamp level programmable via an internal CLAMP register. A 3-bit PGA is included to maintain SNR for small
signals. The THS1031 provides a wide selection of voltage references to match the user’s design requirements.
For more design flexibility, the internal reference can be bypassed to use an external reference to suit the dc
accuracy and temperature drift requirements of the application. The out-of-range output indicates any
out-of-range condition in THS1031’s input signal. The format of digital output can be coded in either unsigned
binary or 2s complement.

The speed, resolution, and single-supply operation of the THS1031 are suited to applications in set-top-box
(STB), video, multimedia, imaging, high-speed acquisition, and communications. The built-in clamp function
allows dc restoration of video signal and is suitable for video applications. The speed and resolution ideally suit
charge-couple device (CCD) input systems such as color scanners, digital copiers, digital cameras, and
camcorders. A wide input voltage range between REFBS and REFTS allows the THS1031 to be applied in both
imaging and communications systems.

The THS1031C is characterized for operation from 0

°

C to 70

°

C, while the THS1031I is characterized for

operation from –40

°

C to 85

°

C.

AVAILABLE OPTIONS

TA

PACKAGED DEVICES

TA

28-TSSOP (PW)

28-SOIC (DW)

0

°

C to 70

°

C

THS1031CPW

THS1031CDW

– 40

°

C to 85

°

C

THS1031IPW

THS1031IDW

Copyright 

 2002, Texas Instruments Incorporated

PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

1

2

3

4 

5

6

7

8

9

10

11

12

13

14

28

27

26

25

24

23

22

21

20

19

18

17

16

15

AGND

DV

DD

I/O0
I/O1
I/O2
I/O3
I/O4
I/O5
I/O6
I/O7
I/O8
I/O9

OVR

DGND

AV

DD

AIN
VREF
REFBS
REFBF
MODE
REFTF
REFTS
CLAMPIN
CLAMP
REFSENSE
WR
OE
CLK

28-PIN TSSOP/SOIC PACKAGE

(TOP VIEW)

Summary of Contents for THS1031










































Reviews:

No comments

Related manuals for THS1031

Samson 6111 Mounting And Operating Instructions preview
6111
Brand: Samson Pages: 28
Dolby Laboratories SEU4 User Information preview
SEU4
Brand: Dolby Laboratories Pages: 23
B&B ILinx 485DRCI-PH Quick Start Manual preview
ILinx 485DRCI-PH
Brand: B&B Pages: 2
Wagan Slimline Plus 1250 User Manual preview
Slimline Plus 1250
Brand: Wagan Pages: 32
HEIDENHAIN LIDA 475 Mounting Instructions preview
LIDA 475
Brand: HEIDENHAIN Pages: 44
PRIZM Video 3 User'S Manual And Troubleshooting Manual preview
Video 3
Brand: PRIZM Pages: 7
MyGica ATV520E User Manual preview
ATV520E
Brand: MyGica Pages: 28
SMA Solar Technology AG STORAGE PACKAGE - BUSINESS System Manual preview
STORAGE PACKAGE - BUSINESS
Brand: SMA Solar Technology AG Pages: 30
UCEC USB 2.0 UVC Quick Start Manual preview
USB 2.0 UVC
Brand: UCEC Pages: 22
JMC YUAN SC710N4 HDMI2.0 User Manual preview
YUAN SC710N4 HDMI2.0
Brand: JMC Pages: 8
Kramer VM-1120 User Manual preview
VM-1120
Brand: Kramer Pages: 16
Samlexpower PST-600-12 Owner'S Manual preview
PST-600-12
Brand: Samlexpower Pages: 48
AEG ID ARE i5 Instruction Manual preview
ARE i5
Brand: AEG ID Pages: 20
Wellav SMP181-HLS User Manual preview
SMP181-HLS
Brand: Wellav Pages: 24
Wavetronix click 301 Using Manual preview
click 301
Brand: Wavetronix Pages: 13
oventrop Regtronic RQ Installation And Operating Instructions For The Specialised Installer preview
Regtronic RQ
Brand: oventrop Pages: 40
DV Signage VS-700L ViewStream 700L Manual preview
VS-700L ViewStream 700L
Brand: DV Signage Pages: 30
ABB UNV-F Operation Manual preview
UNV-F
Brand: ABB Pages: 63

Brands by name

Popular brands

Load more brands